This topic describes how to configure Fusebill for credit card payment processing via the Chase Paymentech gateway. If you wish to configure ACH payment processing, see Set Up the Chase Paymentech ACH Gateway.
Fusebill currently supports Chase Orbital Stratus, Chase Orbital Salem, and Chase Orbital Tampa platforms. To determine the Chase platform you are using, please consult the merchant information provided by Chase.
Paymentech supports both CCV/CVV and Address Verification.
Note
If you are using Chase Orbital Tampa, please contact Fusebill Support prior to completing this setup, as additional steps may be required.
Tip
For important considerations when choosing a payment gateway, see Choosing Your Payment Gateway. For more information about Chase Merchant Services, visit their website.
To configure your payment gateway:
-
Contact your Chase representative to request or confirm that the Fusebill Submitter ID: 380356 has been linked to your Chase Merchant ID. You will also want to contact the Chase Orbital tech support line: (800) 254-9556 and ask them to whitelist the following IP addresses:
Production: 64.26.135.113-127
Staging: 72.142.117.98
BIN 000001 = Orbital Salem/Stratus
BIN 000002 = Orbital Tampa
Terminal: 001
-
In Fusebill, navigate to Settings>Collections>Gateways and click Show Other Supported Gateways.
-
Under "Credit Card" click CHASE PAYMENTECH.
The Fusebill configuration pop-up appears.
-
Enter your Merchant ID. This can be found in the merchant information provided by Chase or copied from the Paymentech Orbital Virtual Terminal.
-
From the Chase Certification dropdown list, select:
-
Use Fusebill's to use Fusebill's pre-certification with Chase. This is the quickest and simplest option.
-
Use my own credentials if you have already certified with Chase and wish to use your own credentials. Additional fields will appear for you to enter your Chase username and password.
-
-
From the Bin dropdown list, select:
-
BIN 000001 if you are configuring a Chase Orbital Salem or Chase Orbital Stratus payment gateway
-
BIN 000002 if you are configuring a Chase Orbital Tampa payment gateway (Contact Fusebill Support prior to configuring this gateway)
-
-
In the Fusebill configuration pop-up, configure vault storage options according your needs.
To use the credit card number from the Fusebill Vault at the time of payment:
-
Store Credit Cards in Fusebill Vault: On
-
Store Credit Cards in Chase Vault: Off
To use the credit card number from the Chase Vault at the time of payment and store a copy of it in the Fusebill Vault:
-
Store Credit Cards in Fusebill Vault: On
-
Store Credit Cards in Chase Vault: On
To use the credit card number from the Chase Vault at the time of payment and NOT keep a copy in the Fusebill Vault:
-
Store Credit Cards in Fusebill Vault: Off
-
Store Credit Cards in Chase Vault: On
Note that:
-
At least one Vault option must be set to On.
-
The Chase Vault allows you to leverage the auto-updater feature which automatically updates credit card numbers based on information provided by the credit card issuer. If you have this turned on, the copies in the Fusebill Vault maybe become outdated as auto-updater only works on the Chase Paymentech side.
-
-
If you are working in a Paymentech test environment, ensure Developer Mode is selected.
Warning
Fusebill will still interpret all transactions as legitimate, so you will need to refund charges made in this mode in order to maintain proper ledger balances in Fusebill.
Note
The sample credit card numbers provided by Fusebill may work with your gateway in Developer Mode; however, Fusebill recommends contacting your payment processor to obtain the test numbers that they recommend.
-
Click Save.
Comments
0 comments
Article is closed for comments.